Jump to content

Installing Greddy E-Manage into a CA18DET S13.


Recommended Posts

GREDDY EMANAGE INSTALL INTO CA18DET S13.

 

Items used :

 

Philips Screwdriver

Soldering iron

Heatshrink

Solder

Cutters

Electrical tape.

 

Easy forward install, most are just tap ins, apart from these wires. Follow closely, otherwise the car will not start. Please Make sure you disconnect the battery, and while disconnected push the brake pedal a few times to clear ECU. Please only install if you are an auto sparky, or very very confident with wiring. Otherwise theres many problems you can come across, and you’ll either break your ECU, your emanage, both or a lot of other stuff… so a very big WARNING.

 

Also, when viewing plugs, view as wires go into them. Otherwise it will be back to front.

 

AIRFLOW METER INPUT.

 

Cut the Air Flow Meter wire to intercept, WHITE goes to AIRFLOW METER, GREEN wire goes to ECU.

 

 

IGNTION TIMING

 

The Ignition timing harness is a little more fiddly, it requires cutting of every wire, and then resoldering on, so be very careful with this one, as if you go backwards, you will not be able to start your car.

 

Same principle on all wires, WHITE is the input from the ECU, BLACK is the output to the COILPACKS

 

 

these are the pinouts of the harnesses on the emanage, just as you would view them if they were plugged in

 

http://i9.tinypic.com/2zjfew1.jpg

 

Pinouts on ECU As you see them when you take out off the cover. Note, where theres the orange writing, thats where the coloured wires on the back of the emanage has to go.

http://i10.tinypic.com/4hljcqq.jpg

 

Any help, i am easy to get hold of. Right click photos and save as for clear copies.

 

Pete

Link to post
Share on other sites

And this is the Software screen.

 

This screen shows the Parameter settings that you can adjust if you using a different AFM, and if you changing your injectors, it gives you a Injector Correction.

 

http://i64.photobucket.com/albums/h162/rexhunta/emanage/parametersettings.jpg

 

This Screen is where everything comes to play.. This is the actual Mapping screen, and this was part of my tune on my old car. All you do is add or subject parts in here, and it edits the tune.

 

http://i64.photobucket.com/albums/h162/rexhunta/emanage/EMANAGEMAPS.jpg

 

And last but not least, this screen shows you RealTime Data, that you can datalog to a laptop etc.

 

http://i64.photobucket.com/albums/h162/rexhunta/emanage/logscreen.jpg

Link to post
Share on other sites
×
×
  • Create New...