Jump to content

Drift Button Install


Recommended Posts

Ok this is simple as but i managed to screw it up!

 

1st remove the handbrake cover and you should get this...

post-7122-1216178821_thumb.jpg

 

Then with a flat head screwdriver remove the little spring on the passenger side of the handbrake (just flick it off the little tab)

post-7122-1216178998_thumb.jpg

 

Then put the cover back on and push the button onto the end. (make sure you put the cover on first, i didn't then went to pull the button off and the handbrake fell to bits :( )

Then your done should look like this!

post-7122-1216179256_thumb.jpg

Edited by Rando
Link to post
Share on other sites
  • 1 year later...
Ok this is simple as but i managed to screw it up!

 

1st remove the handbrake cover and you should get this...

post-7122-1216178821_thumb.jpg

 

Then with a flat head screwdriver remove the little spring on the passenger side of the handbrake (just flick it off the little tab)

post-7122-1216178998_thumb.jpg

 

Then put the cover back on and push the button onto the end. (make sure you put the cover on first, i didn't then went to pull the button off and the handbrake fell to bits :( )

Then your done should look like this!

post-7122-1216179256_thumb.jpg

 

Alot of help thanks

Link to post
Share on other sites
×
×
  • Create New...